汽車爆缸是指發動機溫度過高，導致活塞膨脹變形，卡在缸內，導致發動機報廢。汽車氣缸爆炸嚴重時，由于壓力過高，活塞無法移動，會噴出濃濃的火焰。汽油機，混合氣進入燃燒室后，燃燒過程非常復雜，需要相當精確的設計和控制。如果出現控制錯誤或異常，就會引起異常燃燒，“爆缸”就是異常燃燒。簡單來說，爆缸就是燃燒異常導致的燃燒室內壓力異常。
Car cylinder explosion refers to the phenomenon where the engine temperature is too high, causing the piston to expand and deform, getting stuck in the cylinder, and causing the engine to be scrapped. When a car cylinder explodes severely, due to excessive pressure, the piston cannot move and will emit a thick flame. In a gasoline engine, after the mixture enters the combustion chamber, the combustion process is very complex and requires quite precise design and control. If there is a control error or abnormality, it will cause abnormal combustion, and "cylinder explosion" is abnormal combustion. Simply put, cylinder explosion is the abnormal pressure in the combustion chamber caused by abnormal combustion.
汽車氣缸爆缸有的反應
Some reactions of car cylinder explosion
1、汽車動力越來越弱:
1. The power of cars is getting weaker and weaker:
不管你怎么踩油門，車都走不動。可能是供油系統和點火系統有問題。
No matter how hard you press the accelerator, the car won't move. There may be a problem with the fuel supply system and ignition system.
建議檢查供油系統。關鍵點包括供油管路和燃油壓力泵。如果是這個問題，請更換損壞的備件。檢查點火系統，是火花塞、點火線圈、氣缸線等。
Suggest checking the fuel supply system. Key points include the fuel supply pipeline and fuel pressure pump. If this is the problem, please replace the damaged spare parts. Check the ignition system, with a focus on spark plugs, ignition coils, cylinder wires, etc.
2、氣缸塞摩擦噪音:
2. Cylinder plug friction noise:
汽車在轉彎時會有漂移、顛簸的癥狀，汽車會有明顯的晃動震動。發動機溫度降下后，拆下氣缸蓋檢測氣缸壁的拉傷情況。同時，卸下活塞環并修整開口間隙，使其符合要求。
Cars may experience drift and bumps when turning, and there may be noticeable shaking and vibration. After the engine temperature drops, remove the cylinder head to check for strain on the cylinder wall. At the same time, remove the piston ring and trim the opening clearance to make it meet the requirements.
Jinan Audi car maintenance personnel have proposed that the cause of the car cylinder explosion is:
1、設計缺陷。汽車發生爆缸，往往是汽車質量問題引起的。汽車的設計存在缺陷，發動機散熱效果不好，導致發動機溫度超過其能承受的高溫度，從而導致發動機爆炸。
1. Design defects. Car cylinder explosions are often caused by quality issues. There are defects in the design of cars, such as poor engine heat dissipation, which leads to engine temperatures exceeding the high temperatures it can withstand, leading to engine explosions.
2、潤滑不足。眾所周知，機油可以起到潤滑作用。如果機油質量不好或者機油不能正常運轉，潤滑性能會受到影響，散熱也會出現問題，這也是氣缸爆炸的主要原因。
2. Insufficient lubrication. As is well known, engine oil can provide lubrication. If the quality of the engine oil is poor or the engine oil cannot operate normally, the lubrication performance will be affected, and there will be problems with heat dissipation, which is also the main cause of cylinder explosion.
3、發動機負荷過高。發動機過度使用和工作負荷過大也會導致氣缸爆炸。
3. The engine load is too high. Excessive use of the engine and excessive workload can also lead to cylinder explosions.
4、進排氣系統或點火正時故障。發動機進排氣系統和點火時間調整不準確也會導致發動機氣缸爆炸。
4. Malfunction in the intake and exhaust system or ignition timing. Inaccurate adjustment of the engine's intake and exhaust system and ignition time can also lead to engine cylinder explosions.
解決方法：汽車氣缸爆炸會對發動機造成嚴重損壞，需要大修才能恢復。一般情況下，汽車氣缸爆炸會嚴重損壞發動機，發動機幾乎報廢。因此，車主應在緊急處理后致電4S店，找專業人士修理或更換發動機。更多相關內容就來我們網站
http://m.liangshuijing.cn進行咨詢！
Solution: Explosion of car cylinders can cause serious damage to the engine, requiring major repairs to recover. In general, an explosion of a car cylinder can seriously damage the engine, and the engine is almost scrapped. Therefore, car owners should call the 4S store after emergency treatment to find professionals to repair or replace the engine. For more related content, come to our website http://m.liangshuijing.cn Consulting!
